[mk_page_section bg_image=”https://mechanical-devices.com/wp-content/uploads/2018/11/bkg-tech-04.jpg” bg_position=”center center” bg_repeat=”no-repeat” bg_stretch=”true” enable_3d=”true” video_color_mask=”#4b4e59″ video_opacity=”0.8″ sidebar=”sidebar-1″][vc_column][mk_padding_divider size=”100″][vc_column_text el_class=”whitext” css=”.vc_custom_1518446154189{margin-bottom: 0px !important;}”]
Settling Time
[/vc_column_text][mk_padding_divider size=”100″][/vc_column][/mk_page_section][mk_page_section][vc_column width=”1/2″][mk_padding_divider size=”50″][vc_column_text css=”.vc_custom_1518446114455{margin-bottom: 0px !important;}”]FlexTC direct conduction thermal transfer solution is characterized by very short Tcase settling time. Temperatures transfer speed is a function of the temperature transfer coefficient (here in after referred as the “H factor”) between the touching surfaces – the higher the H factor is, the faster temperatures will transfer between the bodies.
FlexTC systems H factor is very high 4000(W·K¯¹·m¯²) compared to air- stream-based systems H factor which is only 120(W·K¯¹·m¯²) as a consequence temperatures are transferred within seconded from the device plunger to the DUT, dropping the case stabling time to seconds.
Example – Jumping into a swimming pool at 10°C will feel cold in a split of a second due to the high temperature transfer coefficient of water (Hwater=3000)which transferred the 10°C to the skin in a split of a second. However, going outdoors @ 10°C will not feel cold due to the low temperature transfer coefficient of air (Hair=80) which will only transfers the 10°C to the skin after long duration.[/vc_column_text][mk_padding_divider size=”50″][/vc_column][vc_column width=”1/2″][mk_padding_divider size=”50″][mk_image src=”https://mechanical-devices.com/wp-content/uploads/2018/11/clip-07.jpg” image_size=”full” desc=”Rapid temperature transfer between the Device Plunger and the DUT thanks to the high temperature transfer coefficient between the surfaces” align=”center”][/vc_column][/mk_page_section]